Alfred University Research and Archive (AURA)

Browsing College of Ceramics: School of Engineering by Title

Browsing College of Ceramics: School of Engineering by Title

Sort by: Order: Results:

  • Brown, Rachel (Kazuo Inamori School of Engineering at Alfred University., 2015-09)
    A large percentage of the usable fuel employed in a commercial bus is utilized to overcome the aerodynamic drag at highway speeds and therefore if reduced could produce a large reduction in the total fuel consumption of ...
  • Sundlof, Brian (New York State College of Ceramics at Alfred University. Kazuo Inamori School of Engineering., 1999-12)
    The goal of this research was to produce ceramic alumina microstructures with controlled porosity attained through the exploitation of polymeric phase separation. In order to accomplish this goal, a fundamental understanding ...
  • Stohr, Darren (New York State College of Ceramics at Alfred University. Kazuo Inamori School of Engineering., 2004-04)
    Atomistic computer simulation techniques were used to model the surfaces of five crystal structures in the hexa-aluminate family. Calcium, strontium, and the theoretical barium hexa-alumunates with the magnetoplumbite ...
  • Wang, Bu (New York State College of Ceramics at Alfred University. Kazuo Inamori School of Engineering., 2012-02)
    The defect structures in two promising intermediate temperature solid oxide fuel cell electrolytes, gadolinia-doped ceria (GDC) and scandia-doped zirconia (SDZ), were studied by atomistic computer simulations. In GDC, ...
  • Nichols, Eric (New York State College of Ceramics at Alfred University. Kazuo Inamori School of Engineering., 2010-09)
    The systematic design of materials for energy production and remediation of environmental concerns, based on direct knowledge of the structural and optical absorption characteristics of layered and traditional perovskites, ...
  • Walsh, Conor James (Alfred University. Faculty of Ceramic Engineering. Kazuo Inamori School of Engineering, 2004)
    This study focuses on a lead free, high temperature ceramic capacitor material having the base composition of (Bi0.5 Na0.5) TiO3. The goal is to modify this base composition to create a material that has X7R-like dielectric ...
  • Placek, Lana (New York State College of Ceramics at Alfred University. Kazuo Inamori School of Engineering., 2016-03)
    Compositional modifications of traditional bioactive glasses were investigated to address adversity associated with the biological response after spinal cord injury (SCI); specifically the accumulation of calcium (Ca) ...
  • Hill, Brenden (New York State College of Ceramics at Alfred University. Kazuo Inamori School of Engineering., 2012-04)
    The reduction of NixMg1-xAl2O4 in H2 to form nickel metal and a remnant oxide was characterized by XRD, HTXRD, TGA, pycnometry, TEM, and SEM. The aim of the work was to investigate the dynamics of the system to better ...
  • Luisi, Brian S (Alfred University. Faculty of Ceramic Engineering. Kazuo Inamori School of Engineering., 2003)
    Aurivillius phases of the type Bi_{2}Sr_{2}Nb_{2}TiO_{12} and Bi_{1.6}Pb_{0.4}Sr_{2}Nb_{2}Ti_{1-x}Al_{x}O_{12} (0.0 ≤ x ≤ 0.8) were synthesized by the polymerized complex method involving an organo-metallic precursor. The ...
  • Harvey, Steven P. (Alfred University. Faculty of Ceramic Engineering. Kazuo Inamori School of Engineering., 2004)
    The polymerized complex method was utilized to synthesize n=3 Aurivillius compounds based on the parent phase Bi_{2}Sr_{2}Nb_{2}TiO_{12}. Results show that this is a viable option to replace solid-state synthesis of these ...
  • Bornstein, Kody (New York State College of Ceramics at Alfred University. Kazuo Inamori School of Engineering., 2013-01)
    Colloid formation in As2O3-doped alkali galliosilicate glass was studied via reduction of Ga and As in a galliosilicate glass matrix. The colloids were formed by heat treatment of the glasses in a hydrogen H2 or deuterium ...
  • Rossington, Katherine (New York State College of Ceramics at Alfred University. Kazuo Inamori School of Engineering., 1999-10)
    This research investigated the colloidal behavior of kaolinitic clay in aqueous suspensions. The foundation of most current clay suspension behavior is based on early studies conducted prior to the application of colloidal ...
  • Alberga, Michael (New York State College of Ceramics at Alfred University. Kazuo Inamori School of Engineering., 2016-06)
    Beta-gallia rutile intergrowth materials (BGRs), a homologous series following Ga4Tin-4O2n-2 (15 ≤ n ≤ 25, odd), were investigated as potential n-type thermoelectric device candidates given their structural similarities ...
  • Ugorek, Michael S. (Alfred University. Faculty of Ceramic Engineering. Kazuo Inamori School of Engineering, 2004)
    A comparative study of the microstructure and electrical properties was conducted on three different sintering techniques – microwave, fast – fire, and traditional – were investigated as a means of sintering 8 mol% YSZ. ...
  • Wilantewicz, Trevor (New York State College of Ceramics at Alfred University. Kazuo Inamori School of Engineering., 2005-11)
    The crack initiation behavior of nine optical glass compositions was investigated in the current work. A recording microindenter equipped with optical observation and an acoustic emission detection system were used ...
  • Pettit, Corine (New York State College of Ceramics at Alfred University. Kazuo Inamori School of Engineering., 2016-09)
    Injection molding is a common industrial process used to create near-net shaped ceramic parts. In today’s industry, it is most common for injection molding batches to use thermoplastic binder systems; however the advantages ...
  • Pinto, Brian (New York State College of Ceramics at Alfred University. Kazuo Inamori School of Engineering., 2006-02)
    Porcelain bodies were created to test the hypothesis that critical flaws govern the strength of ceramics. By systematically evaluating controlled changes to the porcelain body on mechanical properties and critical flaw ...
  • Shi, Jiawanjun (New York State College of Ceramics at Alfred University. Kazuo Inamori School of Engineering., 2015-02)
    The crystal structures of assorted Aurivillius compositions have been indexed and refined from combined Neutron and x-ray powder diffraction data. The crystal structure distortions were discussed quantitatively from ...
  • Horning, Zain (Alfred University. Faculty of Ceramic Engineering. Kazuo Inamori School of Engineering, 2004)
    In this thesis, a low noise, first-order, delta-sigma analog to digital modulator (ΣΔM) has been designed using a standard 0.5um CMOS process. The modulator is an amalgam of several other circuits including a folded-cascode ...
  • Horning, Joshua (Kazuo Inamori School of Engineering at Alfred University, 2014-09)
    In this thesis a hybrid rocket engine will be designed and built to experimentally test different materials which can be used for fuel. Hybrid rockets contain both a solid propellant such as hydroxyl-terminated polybutadiene ...

Search


Browse

My Account