Inamori School of Engineering

 

Sub-communities within this community

Collections in this community

Recent Submissions

  • Wu, Yiquan; Zhang, Guangran; Goldstein, Adrian (Springer, 2022-01)
    In this study we fabricated, for the first time, magnesium gallate (MgGa2O4, a partially inverted spinel) transparent ceramics, both undoped and doped with 1 at% Ni. The specimens were derived from in-house prepared powder, ...
  • Möncke, Doris; Wójcik, Natalia A.; Tagiara, Nagia S.; Kamitsos, Efstratios I.; Ali, Sharafat; Ryl, Jacek; Barczyński, Ryszard J. (Springer, 2022-01)
    Electrical properties of beryllium-alumino-tellurite glasses and glass–ceramics doped with iron ions were studied using impedance spectroscopy. The conductivity was measured over a wide frequency range from 10 mHz to 1 MHz ...
  • Schrock, Benjamin (New York State College of Ceramics at Alfred University. Inamori School of Engineering., 2022-04)
    This work focuses on determining the diffusion coefficient of potassium in silica at high temperatures. Understanding this diffusion helps predict the final profile of optical fiber. This work also investigates several ...
  • McGarrity, Kade A. (New York State College of Ceramics at Alfred University. Inamori School of Engineering., 2022-05)
    Silicon nitride (Si3N4) and its related materials have been the subjects of research for 70 years and have garnered interest for applications ranging from cutting tools and bearings to turbine blades and spinal implants. ...
  • Mahany, Timothy R. (New York State College of Ceramics at Alfred University. Inamori School of Engineering., 2022-04)
    Additive manufacturing (AM) allows for the rapid production of a desired shape, and enables the ability to modify the design before it is produced again. This can be a valuable tool in industry as a method for manufacturing ...
  • Flint, Madeleine N. (New York State College of Ceramics at Alfred University. Inamori School of Engineering., 2022-02)
    Layered δ-MnO2 (birnessite) exhibits a unique response to the reduction of Mn4+ to Mn3+, where the reduced Mn3+ Jahn-Teller distorted octahedron creates a 'surface Frenkel defect.' The reduced Mn3+O6 octahedron migrates ...
  • Fekety, Curtis (New York State College of Ceramics at Alfred University. Inamori School of Engineering., 2022-02)
    A phenomenon was observed during work producing "ultra-thin glass" (<150μ thickness) where samples folded onto themselves displayed strong adhesion and served as a simple method to analyze contaminants in the process and ...
  • Stevens, Mackenzie N. (New York State College of Ceramics at Alfred University. Inamori School of Engineering., 2021-09)
    This study uses the direct observation of the heating of cylindrical powder compacts via hot-stage microscope (HSM), with heating rates from 1.0 to 60 K/min, to establish sintering ranges and activation energies of three ...
  • Lee, Hyojin (New York State College of Ceramics at Alfred University. Inamori School of Engineering., 2021-12)
    The hardness of alkaline earth aluminosilicate glasses was evaluated focusing on the alumina level and atomic packing density of the system. To identify the compositional matrices, a comprehensive investigation was conducted ...
  • Fordham, Ryan (New York State College of Ceramics at Alfred University. Inamori School of Engineering., 2021-08)
    Additive manufacturing enables freedom of design and rapid prototyping which are valuable assets in every application and industry. Cerium oxide (ceria) is well-known for applications in various fields, including abrasives, ...
  • Chang, Yiwen (New York State College of Ceramics at Alfred University. Inamori School of Engineering., 2021-10)
    Refractory high entropy alloys (RHEAs) are newly designed alloys with multi-principal-refractory elements in the system to maintain a solid solution. In this research, 5 novel attempts at a single body centered cubic (BCC) ...
  • Fraser, Orray Thurber (New York State College of Ceramics at Alfred University. Inamori School of Engineering., 1925)
    In this paper, the process of manufacture and production of architectural terra cotta will be discussed. The author has spent the past summer of 1924 in the plant of the Corning Terra Cotta Company located in Corning, New ...
  • Ding, Junjun; Liu, Chao; Le, Linh; Zhang, Mingshao (Wiley, 2021-12)
    The compressive strain sensor is an extensively used flexible electronic device because of its capability to convert mechanical deformation to an electrical signal. However, the difficulty in tuning the performance of the ...
  • Walker, William J., Jr. (New York State College of Ceramics at Alfred University. Inamori School of Engineering., 1992-02)
    An amorphous polyethylene glycol compound (PEG20M) and polymer blends containing PEG20M as a major component were evaluated as binder systems for the dry pressing of spray-dried ceramic powders. Comparisons were made with ...
  • Zaengle, John T. H. C. (New York State College of Ceramics at Alfred University. Inamori School of Engineering., 2021-04)
    Additive manufacturing (AM) of electroceramics is of interest because electroceramics are an excellent fit for solid oxide electrolytes. Faster material testing through the use of rapid prototyping made available through ...
  • Modugno, Max C. (New York State College of Ceramics at Alfred University. Inamori School of Engineering., 2021-01)
    Several theories have been proposed to describe the mechanical behavior of porcelains, all of which suggest that the behavior of porcelain is inconsistent with brittle failure theories. The literature demonstrates that the ...
  • Locker, Sean (New York State College of Ceramics at Alfred University. Inamori School of Engineering., 2021-08)
    High-intensity femtosecond laser pulses have the necessary field strength to induce nonlinear ionization processes in glasses, resulting in permanent modification to structure and optomechanical properties. While ultrafast ...
  • Fletcher, Jessica (New York State College of Ceramics at Alfred University. Inamori School of Engineering., 2020-10)
    Prior to the development of this thesis, an extensive literature review was conducted to explore coatings on medical devices to garner the necessary background. The literature highlights four fundamental aspects of coating ...
  • Topper, Brian (New York State College of Ceramics at Alfred University. Inamori School of Engineering., 2020-11)
    The thesis begins with a comprehensive review of the structure and properties of borate glasses. This is followed by a predominantly qualitative assessment of highly modified lithium and strontium borates containing yttrium ...
  • Ladonis, Alec C. (New York State College of Ceramics at Alfred University. Inamori School of Engineering., 2020-12)
    While many investigations rely on macro- or nanoscale techniques to determine the deactivation mechanisms on selectively reducible oxide catalysts, little attention is paid to the surfaces and near-surface effects. This ...

View more