Mechanical Properties of Photomultiplier Tube Glasses for Neutrino Detection

Date

2014-02

Journal Title

Journal ISSN

Volume Title

Publisher

New York State College of Ceramics at Alfred University. Kazuo Inamori School of Engineering.

Abstract

This thesis focuses on various mechanical properties affecting the performance of two vendor-supplied glasses currently used for photomultiplier tubes (PMTs) with the specific objective of improving these properties using chemical (potassium-sodium ion exchange) strengthening. The results show that a 46% increase in MOR with one vendor glass, and a 57% increase in the other, can be produced. The results also show narrowing of the MOR distributions as indicated by an increased Weibull modulus. The additional processing that leads to these improvements, along with increases in surface hardness, had no negative effects on the light absorbance over the wavelengths of interest. These findings suggest that the strengthening process could be optimized to produce even greater strengths and better resiliency of the PMTs in service.

Description

Advisory committee members: Matthew Hall, William LaCourse. Dissertation completed in partial fulfillment of the requirements for the degree of Masters of Science in Materials Science and Engineering at the Kazuo Inamori School of Engineering, New York State College of Ceramics at Alfred University

Keywords

Citation

DOI